GEMMER - American Classic..
-
- Posts: 292
- Joined: Sat Jan 28, 2006 2:40 pm
-
- Posts: 292
- Joined: Sat Jan 28, 2006 2:40 pm
You guys/gals have been patient, sorry for the delay. I hope you are still enjoying these updates. I'm not getting much feedback so I hope this isn't becoming tedious.
Here are some interesting shots of engraving of the silver pieces inlayed in the wood. This is very difficult to do without damaging the surrounding wood. It is a high risk prospect for the engraver and really seperate the men from the boys. For those of you interested in these sorts of things, one can see that the equipment used is rather remarkable. Inlays are all done, screws are all done.
Nest time I'll have some of the detailed work as the patch box is next!
Set up is everything....wood is SOFT!
Getting ready...
Can you believe the equipment? Detailed work like you are seeing (with 10 curls being covered by a dime) are made possible by the combination of artistic skill, training and some remarkable equipment...
Looks imple enough...but folks, these are the tiny insets on either side of the forearm that surround the barrel pins.....we are looking at TINY.
Here are some interesting shots of engraving of the silver pieces inlayed in the wood. This is very difficult to do without damaging the surrounding wood. It is a high risk prospect for the engraver and really seperate the men from the boys. For those of you interested in these sorts of things, one can see that the equipment used is rather remarkable. Inlays are all done, screws are all done.
Nest time I'll have some of the detailed work as the patch box is next!
Set up is everything....wood is SOFT!
Getting ready...
Can you believe the equipment? Detailed work like you are seeing (with 10 curls being covered by a dime) are made possible by the combination of artistic skill, training and some remarkable equipment...
Looks imple enough...but folks, these are the tiny insets on either side of the forearm that surround the barrel pins.....we are looking at TINY.
- Gregory Young
- Posts: 505
- Joined: Sat Jul 14, 2007 8:33 am
Damn Yankee,
Please keep the updates coming. I find this quite fascinating to watch. Gemmers are cool to begin with but this one is turning into an absolute work of art. Personnally I would like to see every step to the end. I can only wish.
Please keep the updates coming. I find this quite fascinating to watch. Gemmers are cool to begin with but this one is turning into an absolute work of art. Personnally I would like to see every step to the end. I can only wish.
Greg
Creedmoore Target 45-70
Buisiness Rifle 45-70
NRA Life (EPL)
NMLRA
Creedmoore Target 45-70
Buisiness Rifle 45-70
NRA Life (EPL)
NMLRA
- DavidVanVorous
- Posts: 125
- Joined: Mon Apr 10, 2006 5:01 pm
- Location: Bozeman
DAMN YANKEE wrote:You guys/gals have been patient, sorry for the delay. I hope you are still enjoying these updates. I'm not getting much feedback so I hope this isn't becoming tedious.
Here are some interesting shots of engraving of the silver pieces inlayed in the wood. This is very difficult to do without damaging the surrounding wood. It is a high risk prospect for the engraver and really seperate the men from the boys. For those of you interested in these sorts of things, one can see that the equipment used is rather remarkable. Inlays are all done, screws are all done.
Nest time I'll have some of the detailed work as the patch box is next!
Set up is everything....wood is SOFT!
Getting ready...
Can you believe the equipment? Detailed work like you are seeing (with 10 curls being covered by a dime) are made possible by the combination of artistic skill, training and some remarkable equipment...
Looks imple enough...but folks, these are the tiny insets on either side of the forearm that surround the barrel pins.....we are looking at TINY.
Ive always been facinated by the engraving art but never really had the patience. Of particular interest is in "looking over the engravers shoulder" as it were, even the inletting of the pieces in to the wood is perfect. Many times youll see chisel marks and such near the inle where the inletter "missed" slightly which most times can be seen withthe naked eye. In this case one needs magnification via the engravers microscope and even then its a matter of knowing what to look for...THATS phenomenal workmanship!
Maybe its cuz I forgot over the duration of the thread but is the finished work going to be french grey?
D.
Curmudgeon in Training
"The main proponent for fly fishing is the worm"
McManus.
"The main proponent for fly fishing is the worm"
McManus.
-
- Posts: 292
- Joined: Sat Jan 28, 2006 2:40 pm
Thanks for the kind words. To give credit where credit is due, one of the very best stock makers in the Sharps world did the wood work on this one, his name is Don Franklin (yep same name as the expedition) his work is always a joy to behold. THis rifle was very complicated (Not one but two Compass Roses in the stock and all the trimmings of a Gemmer).
The metal work was all done by Joe Seeley, none finer there either.
YEs, French Grey is recommended and I'm ok with it. There are so many good things happening with this rifle, by so many good people that I am confident that when it all comes together the overall presentation will be incredible.
On that subject, what may become the world's most important firearms auction is about to take place in Maine this Oct. Amoung other Sharps, The Quigley Rifle and a little Big Horn Sharps are up for sale. Should be fantastic!
Check it out here....
http://www.juliaauctions.com/press_releases/pr_2008.asp
Anybody traveling up will be met by a very strong Sharps contingency
The metal work was all done by Joe Seeley, none finer there either.
YEs, French Grey is recommended and I'm ok with it. There are so many good things happening with this rifle, by so many good people that I am confident that when it all comes together the overall presentation will be incredible.
On that subject, what may become the world's most important firearms auction is about to take place in Maine this Oct. Amoung other Sharps, The Quigley Rifle and a little Big Horn Sharps are up for sale. Should be fantastic!
Check it out here....
http://www.juliaauctions.com/press_releases/pr_2008.asp
Anybody traveling up will be met by a very strong Sharps contingency
-
- Posts: 292
- Joined: Sat Jan 28, 2006 2:40 pm
-
- Posts: 299
- Joined: Thu Dec 28, 2006 5:11 pm
- Location: Rock Springs, WY
-
- Posts: 292
- Joined: Sat Jan 28, 2006 2:40 pm
Thank you, much appreciated.
The engraving part of this project is now winding down. There are still three good size panels to be cut, one of them entering compleation as I write this. I must admit that I myself always wanted to see the full development of a Sharps engraving project and am very pelased that Barry has allowed this many pictures to interrupt his work. It is rare and in a sense we are very fortunate. More than 18,000 individual photos of this work have now been downloaded off of the various sites, pretty remarkable world we live in. It is now being featured on a good number of engraving web sites both here and overseas. Seems everybody loves a Gemmer Sharps rifle.
I'll be sure and post out the last engraved pieces and the barrel engraving and the final assembly as I can.
The engraving part of this project is now winding down. There are still three good size panels to be cut, one of them entering compleation as I write this. I must admit that I myself always wanted to see the full development of a Sharps engraving project and am very pelased that Barry has allowed this many pictures to interrupt his work. It is rare and in a sense we are very fortunate. More than 18,000 individual photos of this work have now been downloaded off of the various sites, pretty remarkable world we live in. It is now being featured on a good number of engraving web sites both here and overseas. Seems everybody loves a Gemmer Sharps rifle.
I'll be sure and post out the last engraved pieces and the barrel engraving and the final assembly as I can.
- kamotz
- Posts: 641
- Joined: Tue Feb 11, 2003 9:28 pm
- Location: Rising Sun,MD
- Gregory Young
- Posts: 505
- Joined: Sat Jul 14, 2007 8:33 am