Kirk, can a rifle be engraved after the fact, meaning after is has been delivered?
If it can, I'm thinking in a couple of years of sending my gun back for a few enhancements, like a bit of refreshing on the metal finish, engraving and perhaps a Lucinda hammer which I really like.
Thanks
Laurence
Engraving and finish
-
- Posts: 726
- Joined: Wed Jul 02, 2003 2:35 pm
- Location: Renton, Washington
Engraving and finish
THIS SPACE FOR RENT
RIFLE:
45 - 70 #1 Sporter, shotgun buttplate, bone charcoal, 28 inch heavy octagon, semi fancy wood, pewter tip, MVA soule sights. 11 lbs, 10 1/2 ounces.
RIFLE:
45 - 70 #1 Sporter, shotgun buttplate, bone charcoal, 28 inch heavy octagon, semi fancy wood, pewter tip, MVA soule sights. 11 lbs, 10 1/2 ounces.
-
- Posts: 173
- Joined: Tue Oct 01, 2002 11:36 am
- Location: Alcester, SD
Re: Engraving and finish
I asked Kirk the same question some time ago and this was his answer:
"Hi Mike, you can do this, but it is going to be costly due to the fact, everyting has to be annealed, then re-polished, then re- heat treated. Thanks Kirk"
"Hi Mike, you can do this, but it is going to be costly due to the fact, everyting has to be annealed, then re-polished, then re- heat treated. Thanks Kirk"
from Shiloh:
1874 "Military Carbine" (7 1/2 lb, 22" bbl) in .45-70
1874 "Sporter #1" (25 lb, 34" bbl) in .45-70, rechambered to .45-110
1874 "Military Carbine" (7 1/2 lb, 22" bbl) in .45-70
1874 "Sporter #1" (25 lb, 34" bbl) in .45-70, rechambered to .45-110
-
- Posts: 726
- Joined: Wed Jul 02, 2003 2:35 pm
- Location: Renton, Washington
enhancements
Thanks, Mike.
I thought that might be the case
Laurence
I thought that might be the case
Laurence
THIS SPACE FOR RENT
RIFLE:
45 - 70 #1 Sporter, shotgun buttplate, bone charcoal, 28 inch heavy octagon, semi fancy wood, pewter tip, MVA soule sights. 11 lbs, 10 1/2 ounces.
RIFLE:
45 - 70 #1 Sporter, shotgun buttplate, bone charcoal, 28 inch heavy octagon, semi fancy wood, pewter tip, MVA soule sights. 11 lbs, 10 1/2 ounces.