Using M-Pro 7 to wet wiping patches
-
- Posts: 4745
- Joined: Tue Sep 24, 2002 3:53 pm
- Location: Gillette, Wyoming
Re: Using M-Pro 7 to wet wiping patches
Glenn,
This is a grown up discussion, not really suited to the Pyrodex weenie crowd. Using the faux powder crutch, doesn’t really pertain to this discussion.
You don’t like it scroll on by.
Or if you have something valid to contribute too, then do so, .
Kenny Wasserburger
This is a grown up discussion, not really suited to the Pyrodex weenie crowd. Using the faux powder crutch, doesn’t really pertain to this discussion.
You don’t like it scroll on by.
Or if you have something valid to contribute too, then do so, .
Kenny Wasserburger
We'll raise up our Glasses against Evil Forces, Singing, Whiskey for my men, Beer for my horses.
Wyoming Territory Sharps Shooter
Wyoming Territory Sharps Shooter
-
- Posts: 4745
- Joined: Tue Sep 24, 2002 3:53 pm
- Location: Gillette, Wyoming
Re: Using M-Pro 7 to wet wiping patches
Mike Herth,
Vinegar is acetic acid, which is recognized as a factor in mild steel corrosion. I don’t put that stuff in my gun barrels.
Just my opinion.
Kenny Wasserburger.
Vinegar is acetic acid, which is recognized as a factor in mild steel corrosion. I don’t put that stuff in my gun barrels.
Just my opinion.
Kenny Wasserburger.
We'll raise up our Glasses against Evil Forces, Singing, Whiskey for my men, Beer for my horses.
Wyoming Territory Sharps Shooter
Wyoming Territory Sharps Shooter
-
- Posts: 432
- Joined: Mon Sep 03, 2018 8:06 pm
Re: Using M-Pro 7 to wet wiping patches
I used to use Butch's Black Powder Bore Shine for clean up at the end of the day.
I think it is an effective solvent, but it appears to cause rust.
On the rare occasions that I use it now, I promptly follow with oil.
I think it is an effective solvent, but it appears to cause rust.
On the rare occasions that I use it now, I promptly follow with oil.
-
- Posts: 4745
- Joined: Tue Sep 24, 2002 3:53 pm
- Location: Gillette, Wyoming
Re: Using M-Pro 7 to wet wiping patches
Steve it is a possibility, I have noticed some light brown too on occasion. And that could be what Mike H saw also.
MPro7 alone might be our best bet. More reason to use just it
Now days I use a few wet Mpro7 patches then a couple dry after my last shot. In the match that is, still use Butch’s to clean before going home then Kroil to store. But dry the bore well before shooting again.
Kenny
MPro7 alone might be our best bet. More reason to use just it
Now days I use a few wet Mpro7 patches then a couple dry after my last shot. In the match that is, still use Butch’s to clean before going home then Kroil to store. But dry the bore well before shooting again.
Kenny
We'll raise up our Glasses against Evil Forces, Singing, Whiskey for my men, Beer for my horses.
Wyoming Territory Sharps Shooter
Wyoming Territory Sharps Shooter
-
- Posts: 75
- Joined: Mon Feb 05, 2018 6:37 pm
Re: Using M-Pro 7 to wet wiping patches
Kenny Wasserburger wrote: ↑Tue Apr 12, 2022 3:56 pm Glenn,
This is a grown up discussion, not really suited to the Pyrodex weenie crowd. Using the faux powder crutch, doesn’t really pertain to this discussion.
You don’t like it scroll on by.
Or if you have something valid to contribute too, then do so, .
Kenny Wasserburger
Gee wilikers, looks like I hit a nerve. Sorry 'bout that.
You ass-u-me incorrectly that I don't have a voice. I don't know about where you are, but here in Oklahoma, we women are allowed to vote, be free-thinkers, and, heck, we even are allowed to have separate Facebook accounts from our husbands.
Bless your heart.
-
- Posts: 4745
- Joined: Tue Sep 24, 2002 3:53 pm
- Location: Gillette, Wyoming
Re: Using M-Pro 7 to wet wiping patches
You just proved my point in spades.
Kenny W.
Kenny W.
We'll raise up our Glasses against Evil Forces, Singing, Whiskey for my men, Beer for my horses.
Wyoming Territory Sharps Shooter
Wyoming Territory Sharps Shooter
-
- Posts: 306
- Joined: Tue Sep 20, 2016 9:22 am
- Location: Buffalo, WY
Re: Using M-Pro 7 to wet wiping patches
Kenny and Steve, thanks for your responses, that’s what I was afraid of. I’ll try an 8 oz bottle of M-Pro 7 for cleaning and see if it picks up anything the Windex missed. I’m no chemist and I haven’t had a problem with rust as I keep the bore well oiled. Learned several years ago to dry the bore before shooting, it cost me a couple of Norma cases.
Mike
Mike
-
- Posts: 4745
- Joined: Tue Sep 24, 2002 3:53 pm
- Location: Gillette, Wyoming
Re: Using M-Pro 7 to wet wiping patches
[attachment=0]796A7061-6DFB-4A77-BC63-0AD4207E4303.jpeg[/attachment]Mike and Steve,
I just checked Lyman’s site they say Butch’s protects against corrosion. Wonder if that brown stuff isn’t more carbon?
Kenny W.
I just checked Lyman’s site they say Butch’s protects against corrosion. Wonder if that brown stuff isn’t more carbon?
Kenny W.
You do not have the required permissions to view the files attached to this post.
We'll raise up our Glasses against Evil Forces, Singing, Whiskey for my men, Beer for my horses.
Wyoming Territory Sharps Shooter
Wyoming Territory Sharps Shooter
-
- Posts: 306
- Joined: Tue Sep 20, 2016 9:22 am
- Location: Buffalo, WY
Re: Using M-Pro 7 to wet wiping patches
Kenny, that thought occurred to me as well, but brown always raised a red flag as rust to me. Hopefully a chemist or metallurgist will join in and shed some clarity. How is carbon fouling different from the black gunk we swab out of the bore?
-
- Posts: 2911
- Joined: Wed Feb 03, 2010 3:21 pm
- Location: Montana
Re: Using M-Pro 7 to wet wiping patches
Started using Windex multi vinegar from the start. On the recommendation of MLV I believe.
Couple dry patches and a thorough dousing with CRC Power Lube and put away til next time. (Sometimes a couple years)Haven't found any corrosion yet. Altho a look at the ingredients will scare the weak at heart.
Only time I found what looked like corrosion was when I substituted Butches and came back 6 months later.
Bout had a heart attack. No pitting but an awful.lot of brown came out of the barrel.
Couple dry patches and a thorough dousing with CRC Power Lube and put away til next time. (Sometimes a couple years)Haven't found any corrosion yet. Altho a look at the ingredients will scare the weak at heart.
Only time I found what looked like corrosion was when I substituted Butches and came back 6 months later.
Bout had a heart attack. No pitting but an awful.lot of brown came out of the barrel.
-
- Posts: 4745
- Joined: Tue Sep 24, 2002 3:53 pm
- Location: Gillette, Wyoming
Re: Using M-Pro 7 to wet wiping patches
Found this on a special solvent site.
The brown is carbon.
Ten minutes is long enough for the chemicals in Wipe-Out to react if there is any fouling left in the barrel. Remember that copper will leave a blue patch. Powder fouling will leave a patch greyish black. Carbon will always leave a brown color on the patch.
https://sharpshootr.com › tactical-ad...
Tactical Advantage Tac Platform Brushless Bore Cleaner - Sharp Shoot
KW
PS
I will definitely keep using Butch’s BP boreshine
The brown is carbon.
Ten minutes is long enough for the chemicals in Wipe-Out to react if there is any fouling left in the barrel. Remember that copper will leave a blue patch. Powder fouling will leave a patch greyish black. Carbon will always leave a brown color on the patch.
https://sharpshootr.com › tactical-ad...
Tactical Advantage Tac Platform Brushless Bore Cleaner - Sharp Shoot
KW
PS
I will definitely keep using Butch’s BP boreshine
We'll raise up our Glasses against Evil Forces, Singing, Whiskey for my men, Beer for my horses.
Wyoming Territory Sharps Shooter
Wyoming Territory Sharps Shooter
-
- Posts: 2911
- Joined: Wed Feb 03, 2010 3:21 pm
- Location: Montana
Re: Using M-Pro 7 to wet wiping patches
That's nice to know. Says it's safe on stainless so I liberally wiped my SS barrel a few time and coated a shiny piece of steel . Don't know if I have any carbon in that barrel, but if it comes out brown I'll know it's not rust.
-
- Posts: 306
- Joined: Tue Sep 20, 2016 9:22 am
- Location: Buffalo, WY
Re: Using M-Pro 7 to wet wiping patches
Well done Kenny!
-
- Posts: 109
- Joined: Mon Jul 30, 2018 3:44 pm
Re: Using M-Pro 7 to wet wiping patches
Ian, Kenny,
I’ve got a 200 yard bullseye match coming up this Thursday, I’ll try a more dilute oil water mix. Ian, well done at the Oak Ridge Creedmoor match and it was very nice meeting you.
Cheers Richard
I’ve got a 200 yard bullseye match coming up this Thursday, I’ll try a more dilute oil water mix. Ian, well done at the Oak Ridge Creedmoor match and it was very nice meeting you.
Cheers Richard
- Don McDowell
- Posts: 7648
- Joined: Thu Nov 29, 2007 2:04 pm
- Location: Ft. Laramie Wy
- Contact:
Re: Using M-Pro 7 to wet wiping patches
Richard 7 parts water to 1 part napa cutting oil works good for me
AKA Donny Ray Rockslinger