I'm going to put a new stock on a Shiloh I have that the original stock was cut down to fit the lady that use to own it, its a shame to as it sure is a pretty piece of walnut. I'm 6'4 with a pretty good reach so would like to put a longer one on it. Anyone re-stocked their rifle with a stock from CPA? Before everyone starts saying Treebone, I contacted him first but currently he only has 3 options and the one that would work comes with a shadow lined cheek rest and price seems pretty high for 30% figure and then I'd have to remove cheek rest, just more work for me. CPA has one that fits the bill for what I'm looking for plus I can request a longer LOP. Spoke with them and they said there's are inletted for an Original Sharps at 90 something percent so should work and if not I can return for full refund. I've done stocks before just cant shrink and existing inlet if its to big. Like to hear your experience getting one if anyone has. Thanks
Chris Wilson
New stock for a Shiloh
-
- Posts: 119
- Joined: Wed Feb 04, 2009 11:49 am
- Location: Southwest Oklahoma
New stock for a Shiloh
Chris Wilson
-
- Posts: 175
- Joined: Thu Feb 16, 2023 3:08 pm
Re: New stock for a Shiloh
Hi did you call Shiloh and see about them doing it for you as we all know they do the best!!!
-
- Posts: 119
- Joined: Wed Feb 04, 2009 11:49 am
- Location: Southwest Oklahoma
Re: New stock for a Shiloh
No, I was told that Shiloh doesn't sell stocks so didn't bother.
Chris Wilson
- 1578Tiger
- Posts: 47
- Joined: Thu Jun 24, 2021 6:31 am
- Location: Louisiana
Re: New stock for a Shiloh
I have a friend who has used several stocks from CPA with no complaints. They'll even carve your wood at a good price. Some places won't carve any wood other than their own.
Wayne
“I prefer dangerous freedom over peaceful slavery.”
– Thomas Jefferson, letter to James Madison, January 30, 1787
“I prefer dangerous freedom over peaceful slavery.”
– Thomas Jefferson, letter to James Madison, January 30, 1787
- Luke
- Posts: 439
- Joined: Tue Sep 24, 2002 12:26 pm
- Location: Central Missouri
Re: New stock for a Shiloh
They won't sell you a stock, but I believe they'll do a restock on request.
Limber Up!
-
- Posts: 3863
- Joined: Tue Nov 23, 2004 12:52 pm
Re: New stock for a Shiloh
Luke hit it. But so you know I enquired about replacing a stock on a pre Bryan shiloh once. Mine was a lre model with nice wood that has a crack in it not bad but something a lot of people on this forum would not tolerate. After they explained that duplicating that grade of wood and fitting it would necessitate refinishing the action, they sand to metal on the fit and a new buttplate it would run over 1000 bucks. So if you want to fully restore it you pay, I hope you got into it cheap like 1/2 of what it would have been worth un molested because that is what was done to it. A big part of the pride of Shiloh ownership is the immaculate care of their workmanship and fit. To restore that costs lots of money and wait in time. No real simple expedient fix.if just adding length to the sawed off butt and completing a good recoil reducing pad you could get it to shooter status fairly quick for minimum money. Best of luck. Bobw
bobw
- Luke
- Posts: 439
- Joined: Tue Sep 24, 2002 12:26 pm
- Location: Central Missouri
Re: New stock for a Shiloh
Fwiw I think you could diy, but you'll see unaltered Shiloh's and it'll bug the heck out of you. IMHO I'd sell it to someone who can use it and order one with an LOP you like thru Goodman.
Limber Up!
-
- Posts: 119
- Joined: Wed Feb 04, 2009 11:49 am
- Location: Southwest Oklahoma
Re: New stock for a Shiloh
Thanks for the replies! I got a great deal on this rifle off Steve Baldwin. He had this one stuck back with a full compliment of his sights on it. He told me that he had fixed it up for a lady customer, hence the shortened stock, not sure what happened unless she traded it to him for another rifle or what but he made me an offer I couldn't refuse on it. I plan to pull the stock and forearm and put a different set on it with a longer LOP. I might get around and sell the current furniture to someone that has a shorter reach and could use it as it is some pretty wood.
I spoke with Mike Basset yesterday and I'm going to get a new stock from him. Didn't realize his shop is only 1.5 hrs from my house so works out great. Thanks
Chris Wilson
I spoke with Mike Basset yesterday and I'm going to get a new stock from him. Didn't realize his shop is only 1.5 hrs from my house so works out great. Thanks
Chris Wilson
Chris Wilson
- Luke
- Posts: 439
- Joined: Tue Sep 24, 2002 12:26 pm
- Location: Central Missouri