Caming Tools
-
- Posts: 1151
- Joined: Mon Oct 28, 2013 1:33 pm
Caming Tools
Does anyone know if Scott Ross is still making the Caming tools he was making in 2003. And how to contact him?
-
- Posts: 157
- Joined: Tue Nov 23, 2010 7:06 pm
- Location: Grand Junction
-
- Posts: 297
- Joined: Mon Nov 01, 2004 9:48 am
- Location: Stillwater, OK
Re: Caming Tools
Do not believe Scott Ross is making them anymore.
Take a look at Sagebrush Shooting Products. They have a new camming tool advertised. One to be use with Iron another to used with scope.
http://www.sageoutfitters.com/catalog/i ... 306481.htm
Take a look at Sagebrush Shooting Products. They have a new camming tool advertised. One to be use with Iron another to used with scope.
http://www.sageoutfitters.com/catalog/i ... 306481.htm
-
- Posts: 8
- Joined: Thu Mar 03, 2016 10:41 am
Re: Caming Tools
By golly, I'm glad I looked at this post..didn't know such an animal existed! Have needed one a time or two myself! Thanks! Les
-
- Posts: 1151
- Joined: Mon Oct 28, 2013 1:33 pm
Re: Caming Tools
I think I am going with Arizona Sharpshooters one. The lines look smoother on them.
-
- Posts: 8428
- Joined: Wed Oct 12, 2005 10:28 pm
- Location: Not Far enough NW in Illinois
Re: Caming Tools
That tool needs a groove so it clears a high primer.
The reason a dog has so many friends is because he wags his tail instead of his tongue.
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"Winston Churchill
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"Winston Churchill
-
- Posts: 157
- Joined: Tue Nov 23, 2010 7:06 pm
- Location: Grand Junction
Re: Caming Tools
Arizona s.s. has some in stock, makes them for scope or iron sighted rifles
keep smiling
-
- Posts: 1151
- Joined: Mon Oct 28, 2013 1:33 pm
Re: Caming Tools
I no longer buy from Sagebrush last bullet order took 9 months to get.
-
- Posts: 165
- Joined: Sat Dec 19, 2009 11:53 am
- Location: Exit 14 -New Jersey
Re: Caming Tools
Steve's tool has a slot in it avoid contact with the primer. I had him make me one for one of my .22 Hepburns, that has a tight chamber. It works great.
-
- Posts: 2923
- Joined: Mon Feb 20, 2012 7:06 am
- Location: Jersey Shore
Re: Caming Tools
Believe he was as sick as you are, so you might want to cut him some slack.ChrisF wrote:I no longer buy from Sagebrush last bullet order took 9 months to get.
Glenn
-
- Posts: 1151
- Joined: Mon Oct 28, 2013 1:33 pm
Re: Caming Tools
Did not know that thought he was better what do u mean I am sick
-
- Posts: 1151
- Joined: Mon Oct 28, 2013 1:33 pm
Re: Caming Tools
Did not know that thought he was better what do u mean I am sick
-
- Posts: 297
- Joined: Mon Nov 01, 2004 9:48 am
- Location: Stillwater, OK
Re: Caming Tools
Here are some photos of Ross's and what Steve is currently making. Both great tools.
It is interesting that Steve's cams by pull the lever back and down. Ross' cams by pushing the lever forward.
It is interesting that Steve's cams by pull the lever back and down. Ross' cams by pushing the lever forward.
You do not have the required permissions to view the files attached to this post.