Colored vials for spirit front sight
-
- Posts: 289
- Joined: Tue Oct 08, 2019 8:42 am
- Location: Wyoming
Colored vials for spirit front sight
Just in from shooting the Ballard (32" barrel) under a very over cast sky. Lately under similar conditions I find it somewhat difficult for me to see the bubble and verify it is centered. In sun light it seems to be less of a issue. Its a MVA #113 and they do not offer another color as I was hoping to try. Any suggestions or a source for another spirit vial that would fit? Was shooting at 200 yds, so the tang sight height did not put much angle on barrel to view the bubble?
thanks
kw
thanks
kw
-
- Posts: 11708
- Joined: Mon Nov 20, 2006 1:47 pm
Re: Colored vials for spirit front sight
I got a spirit level front sight from Pedersoli and while not as well made as MVA they did send Blue and Green vials if I remember correctly. I can go get you a measurement if you want. Perhaps they are similar enough in size to be used in your sight.
- Lumpy Grits
- Posts: 7680
- Joined: Tue Jan 28, 2003 7:58 pm
- Location: Springfield, Missouri-U.S.A. Earth
Re: Colored vials for spirit front sight
Why not call MVA and ask'em where they get theirs from?
Gary
Gary
"Hav'n you along, is like loose'n two good men"
-
- Posts: 289
- Joined: Tue Oct 08, 2019 8:42 am
- Location: Wyoming
Re: Colored vials for spirit front sight
Had MVA on the phone earlier today....they did not offer a alternative and I did not push the issue. I unscrewed one of the vial caps to get a measurement of the housing bore but the vial is glued in with what looks like silicone? So was not able to get a accurate diameter...seems to be somewhere around .230". Looking for surveyor instrument vial source seems to be a solution. Had a problem finding a vial last year for my Axtel sight....got the diameter but the lengths where too short or too long. Hate to "dig" out the MVA vial with out a alternative one.
kw
kw
- powderburner
- Posts: 2992
- Joined: Sat May 24, 2003 12:23 am
- Location: elko nv.
Re: Colored vials for spirit front sight
There was a post here quite a while ago about vials of different colors and what would work. I don’t remember a whole bunch but maybe McMaster-Carr had them.. you might try a google search.
Dean Becker
only one gun and they are 74 s
3rd asst. flunky,high desert chapter F.E.S.
MYWEIGH scale merchant
reclining member of O-G-A-N-T
only one gun and they are 74 s
3rd asst. flunky,high desert chapter F.E.S.
MYWEIGH scale merchant
reclining member of O-G-A-N-T
-
- Posts: 11708
- Joined: Mon Nov 20, 2006 1:47 pm
Re: Colored vials for spirit front sight
These measure .197 in diameter and .472 long. You could probably buy some plastic tubing get the diameter close and then center them and silicone them back in.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 1061
- Joined: Wed Jan 31, 2007 3:38 pm
- Location: The Flatlands of Canada
Re: Colored vials for spirit front sight
The reason the MVA vials are siliconed in place is because they have a curvature to them and they have to be oriented with curve at the top of course. The silicone stops them from rotating under recoil. The sun faded the colour in mine after a few years and when I picked up replacements Jim gave me that instruction.
Paul
Paul
"My heroes have always been cowboys and they still are it seems."
- Lumpy Grits
- Posts: 7680
- Joined: Tue Jan 28, 2003 7:58 pm
- Location: Springfield, Missouri-U.S.A. Earth
Re: Colored vials for spirit front sight
Where did you find the ones in the picture?
Gary
Gary
"Hav'n you along, is like loose'n two good men"
-
- Posts: 11708
- Joined: Mon Nov 20, 2006 1:47 pm
Re: Colored vials for spirit front sight
Pedersoli
-
- Posts: 525
- Joined: Tue May 19, 2015 9:19 am
Re: Colored vials for spirit front sight
C Sharps had some but you have to call them. Amazon has a lot of vials - might check them.
-
- Posts: 11708
- Joined: Mon Nov 20, 2006 1:47 pm
Re: Colored vials for spirit front sight
I'd bet these could easily be made to work in any spirit level tube larger than their diameters. All you have to do is shim them up against the tube window from the back side and add a tiny squirt of silicone chalk to make them stay put.
-
- Posts: 123
- Joined: Sat Sep 06, 2008 2:22 pm
- Location: Newton, Iowa
- Contact:
Re: Colored vials for spirit front sight
Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote!
--Benjamin Franklin
--Benjamin Franklin
-
- Posts: 289
- Joined: Tue Oct 08, 2019 8:42 am
- Location: Wyoming
Re: Colored vials for spirit front sight
Thanks guys for the source info. The Dixie/Pedersoli set looks good.
kw
kw
- Tebbeman
- Posts: 219
- Joined: Tue Aug 15, 2006 11:20 am
- Location: Central Illinois...I miss Texas
Re: Colored vials for spirit front sight
I purchased a preowned BPCR rifle that had a light red level in the front sight...I thought it was cool but wasn't sure where to get another. So I took it apart and low and behold, the previous owner had cut a shim from a red Coke Cola can and placed it under the vial...viola a reddish vial. It was pretty easy to see.
My 2 cents.
Kenny T
My 2 cents.
Kenny T
Only two defining forces have ever offered to die for you...Jesus Christ and the American Soldier. One died for your Soul & the other for your Freedom!