Providing Stock Blank
-
- Posts: 23
- Joined: Tue Mar 10, 2020 2:36 pm
Providing Stock Blank
How might it change the price of a Shiloh Rifle if I provide the blank for the stock? I'm going through Cecil Fredi for some Dark English Walnut. I remember seeing somewhere a price for shiloh cutting your stock blank but I can't find it now.
-
- Posts: 1254
- Joined: Fri May 02, 2003 7:47 am
- Location: Casper, Wyoming
Re: Providing Stock Blank
You'll want to call Shiloh for that information I think.
Bryan
Bryan
“I wonder if God created man because He was disappointed with the monkey.” Mark Twain
-
- Posts: 244
- Joined: Thu Aug 30, 2007 12:35 pm
- Location: High Plains
Re: Providing Stock Blank
Weren't they pretty picky about the wood they used due to the thinness of the wrist or something?
-
- Posts: 362
- Joined: Mon Aug 21, 2017 2:00 pm
- Location: Buffalo WY
Re: Providing Stock Blank
I did the Cecil Fredi route for English Walnut, paid $500.00 for a nice medium grade for my 1877 . Shiloh charged me $460.00 to carve the stock and fore end. Cecil was/is the guy Shiloh recommended when I ordered my rifle. You can avoid the $460.00 carving fee if you let Shiloh pick your wood , I wanted to pick mine this time so the fee was applied, the upside is my fore end piece had a crack Shiloh called me to confirm it was a Cecil blank. A couple weeks go by I call to see if all is well or is there something I need to do, nope all taken care of and the rifle is due anytime now.
That’s how it went for me and what I learned.
That’s how it went for me and what I learned.
-
- Posts: 23
- Joined: Tue Mar 10, 2020 2:36 pm
Re: Providing Stock Blank
Thanks Randy!Randy Bohannon wrote: ↑Wed Jan 26, 2022 6:56 pm I did the Cecil Fredi route for English Walnut, paid $500.00 for a nice medium grade for my 1877 . Shiloh charged me $460.00 to carve the stock and fore end. Cecil was/is the guy Shiloh recommended when I ordered my rifle. You can avoid the $460.00 carving fee if you let Shiloh pick your wood , I wanted to pick mine this time so the fee was applied, the upside is my fore end piece had a crack Shiloh called me to confirm it was a Cecil blank. A couple weeks go by I call to see if all is well or is there something I need to do, nope all taken care of and the rifle is due anytime now.
That’s how it went for me and what I learned.
-
- Posts: 236
- Joined: Thu Mar 04, 2004 1:27 pm
Re: Providing Stock Blank
For my 1877 I used an old stable blank of nice European walnut I had earmarked for a .505 Gibbs that was never going to get built. I went this route because it was going to be the last rifle I would order (health problems). Nice straight grain and dense. Very good figure and I needed to use it on something special. Quoted price for supplying your own wood is about right and I would not have done this except for a very special rifle with most of the extra features I wanted. Pleased with the end result. Beautiful rifle! To me the extra cost was worth it. Yahoo account is all messed up after the latest update and I cannot get pictures to my computer to post. If you wish to go this route go for it.
-
- Posts: 362
- Joined: Mon Aug 21, 2017 2:00 pm
- Location: Buffalo WY
Re: Providing Stock Blank
Eric,
That’s good news you are happy with your 1877, I am still in the wait until it’s done mode. I do think the call to come and pick it up will be any day now.
That’s good news you are happy with your 1877, I am still in the wait until it’s done mode. I do think the call to come and pick it up will be any day now.
-
- Posts: 301
- Joined: Sun Jan 12, 2003 9:50 am
- Location: Burns, Or
Re: Providing Stock Blank
Even though it might be expensive, picking out a piece of wood is a piece of cake. I've done a few stocks from scratch, and fit and finish to Shiloh standards is a real bear. I'd not expect much of a discount.
1Minute
- parkergunz
- Posts: 188
- Joined: Mon Jul 11, 2005 6:52 pm
- Location: Hardin, MT.
Re: Providing Stock Blank
This is the wood on my 1877. It is a piece of Shiloh factory supplied extra fancy that was hand selected by my daughter in May 2018. They charge a $50 fee to hand select and it's worth the charge. Kirk showed us what he had in inventory and we narrowed them down to 5 pieces. We went outside with a spray bottle of acetone, wetted each piece and compared them in the sunshine. I'm very pleased with the result. AAA finish and the fit is exquisite.
.
.
You do not have the required permissions to view the files attached to this post.