With the information I have today, I would not use bore dia PP, not sure what your plans are but, I can get 87-88gr of 1.5f in there with the DDPP. Fouling control is pretty tough once the barrel gets hot. If I were to do it again, I'd stick with a groove dia PP to try and keep the fouling and heat lower, possibly even try a GG bullet design with no reduced bands.
matt
40-82
- bpcr shooter
- Posts: 804
- Joined: Sun Feb 04, 2018 5:30 pm
- Location: Madison, Wi
Re: 40-82
NMLRA Member
Winnequah Gun Club Member (Lodi, Wi)
WIFORCE Member
SCI Member
Winnequah Gun Club Member (Lodi, Wi)
WIFORCE Member
SCI Member