33-55 cpa 44 1/2 single shot

Discussions of powders, bullets and loading information.

Moderators: Kirk, Lucinda

Post Reply
bobw
Posts: 3859
Joined: Tue Nov 23, 2004 12:52 pm

33-55 cpa 44 1/2 single shot

Post by bobw »

My bud picked up this gun and it is very nicely done. It came with a 335~gr Hoch mold so that is what we're going to try. My question for the 38-55 shooters here what alloy? Think it is a 14 twist and will be using bp. Have new starline brass rcbs dies. Bobw
bobw
gunlaker
Posts: 2774
Joined: Tue Jun 23, 2009 6:16 pm

Re: 33-55 cpa 44 1/2 single shot

Post by gunlaker »

Bob I have a schuetzen CPA with a 38-55 1:14 twist Badger barrel. For whatever reason, they didn't chamber it with their very shallow leade reamer, but with a 6 degree one. As a result it takes a lot of effort to breech seat the Hoch 335gr tapered bullet and that one never shot that great for me. Instead I've been using the BACO 377325CT ( breech seated ) which is a tapered Creedmoor bullet. It has shot extremely well with a lot of Goex Fg I burned through.

That's for breech seated shooting though.

For fixed ammo, I have a Hoch 377310 bullet that shoots pretty decently in a C. Sharps 1885 with a 1:14 twist barrel.

Chris.
bobw
Posts: 3859
Joined: Tue Nov 23, 2004 12:52 pm

Re: 33-55 cpa 44 1/2 single shot

Post by bobw »

Thanks guns my memory failed me on the bullet it is a hoch mould but..376 and 310 weight. The bottom 2 at 376 and the ones forward of that less smallest on top of course. What alloy do you use? Powder charge? The gun uses the 2.125 case and dropping a bullet in the chamber pushed out shows me a 2.645" oal max. This sound familiar? Bobw
bobw
Nuclearcricket
Posts: 238
Joined: Tue Sep 17, 2013 2:58 pm

Re: 33-55 cpa 44 1/2 single shot

Post by Nuclearcricket »

I have a CPA 38-55 with a 15" twist Badger barrel. For the most part I have shot a Postel bullet that runs about 310 or so. The alloy is about 20-1 give or take some. I also have a Hoch 376-300 tapered bullet that I have shot a little. I just put it together over about 45 gr of Ctg Goex and it shot well enough to 10 out of 10 on pigs at 300 M. Now I did use the whole pig but I figure that is a pretty good start to things.
Sam
gunlaker
Posts: 2774
Joined: Tue Jun 23, 2009 6:16 pm

Re: 33-55 cpa 44 1/2 single shot

Post by gunlaker »

Bob, I also have the 376310. I don't like it as much as the 377310 bullet. The 376 one is tapered but the 377 isn't. I've never got better than 2 moa with the 376310, but when I shot it, I would have used 20:1 and Swiss 1.5.

Chris.
User avatar
bpcr shooter
Posts: 803
Joined: Sun Feb 04, 2018 5:30 pm
Location: Madison, Wi

Re: 33-55 cpa 44 1/2 single shot

Post by bpcr shooter »

I shoot the lyman 379674 and my DDPP both at 16+1. Ive also ran them with Lyman #2 with good success.

matt
NMLRA Member
Winnequah Gun Club Member (Lodi, Wi)
WIFORCE Member
SCI Member
SSShooter
Posts: 2923
Joined: Mon Feb 20, 2012 7:06 am
Location: Jersey Shore

Re: 33-55 cpa 44 1/2 single shot

Post by SSShooter »

While I shoot a 38-55 am sure my 12" twist load of 52gr of 2F Swiss and BACo 365gr Creedmoor bullet hold little interest for your slower twists.
Glenn
SSShooter
Posts: 2923
Joined: Mon Feb 20, 2012 7:06 am
Location: Jersey Shore

Re: 33-55 cpa 44 1/2 single shot

Post by SSShooter »

As a bit more info, on the Garmin chrony, this load charts at 1310fps with an SD of 11.
Glenn
Post Reply